Renewables
We have designed various sensors and components for some of the largest renewable energy companies around as well as also helped with small startup companies investigating Wind, Wave and Tidal renewable projects. Whether you need a sensor to monitor hydraulic spikes or a braking resistor to help with turbine dumped energy, we are here to help.
Cell Guard is a CAN based environmental measurement sensor that can measure:
- Absolute Pressure: 0.3 to 1.2 Bar
- Air Temperature: -40°C to +125°C
- Volatile Organic Compounds (VOCs): 0 to 6553.5 ppm
- Absolute Humidity: 0 to 35000mg/m3
- Relative Humidity: 0 to 100%
- Dew Point Temperature: 0 to 100°C
- Shock load and duration up to ±24G
- Current measurement sensor (ASIL C)
- Current measurement range: ±1kA (±4kA Extended)
- Temperature Measurement
- Communication based on CAN 2.0B with DBC
- Total accuracy of ±0.4% of rdg. +0.1A
- Supply voltage 12V/24V**
- Temperature range from -40°C to +125°C
- Shunt based current measurement (ASIL C)
- 3 or 6 voltage measurement channels (ASIL B)
- Active insulation monitoring (QM) (In samples stage)
- Temperature measurement
- Current measurement range of up to 4,000A (Extended)
- Voltage measurement range of up to 1,250V (Extended)
- Temperature range from -40°C to +125°C
- Non-Clogging submersible pressure transducer
- Pressure ranges from 2 PSI to 50 PSI
- Flush diaphragm prevents clogging
- Hastelloy C276 diaphragm material
- IP68 rated
- Operating temperature of -40 to +85°C
- Compensated temperatures from 0 to +55°C
- Non-incendive pressure transducer
- Pressure ranges from 50 PSI to 30,000 PSI
- Accuracy of ≤±0.25% BFSL at 25°C
- Stability of ≤±0.25% of FS
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Burst pressure of 5x or 60,000 PSI
- Non-incendive low pressure transducer
- Pressure ranges from 1 PSI up to 49 PSI
- Temperature range from −20°C up to +80°C *
- Accuracy of ≤±0.25% BFSL at 25°C **
- Stability of ≤±0.25% of FS (1 year)
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- Non-Incendive Differential Pressure Transducer
- Differential pressure up to 50 PSI
- Line pressure up to 500 PSI
- Accuracy of ≤±0.25% BFSL / ≤±0.5% BFSL (2 PSI & below)
- Overpressure of 2X or 500 PSI (whichever is less)
- Temperature range −40°C to +80°C
- Media temperature of -40 to +125°C
- Explosion-Proof Pressure Transducer
- Pressure ranges from 50 PSI to 30,000 PSI
- One piece diaphragm design – No internal O-rings or welds
- Factory sealed stainless steel case – Withstands harsh environments
- Accuracy of ≤±0.25% BFSL at 25°C (<10,000 PSI)
- Pressure cycles of 100 million
- Overpressure of 2x minimum
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 1GΩ
- Tolerances from ±1% to ±20%
- TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
- Power rating of 0.04W
- Voltage rating of 150V
- Temperature range from -55°C to +150°C
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.5% to ±20%
- TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
- Power rating of 0.06W
- Voltage rating of 400V
- Temperature range from -55°C to +150°C
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.5% to ±20%
- TCR of ±50 ppm/°C, ±100 ppm/°C or ±200 ppm/°C
- Power rating of 0.2W
- Voltage rating of 600V
- Temperature range from -55°C to +150°C
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±200 ppm/°C
- Power rating of 0.33W
- Voltage rating of 1.5kV
- Temperature range from -55°C to +150°C
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±200 ppm/°C
- Power rating of 1W
- Voltage rating of 2kV
- Temperature range from -55°C to +150°C
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±200 ppm/°C
- Power rating of 2W
- Voltage rating of 3kV
- Temperature range from -55°C to +150°C
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±200 ppm/°C
- Power rating of 2W
- Voltage rating of 3.5kV
- Temperature range from -55°C to +150°C
- High Voltage SMD Resistors
- Resistance range from 10kΩ to 50GΩ
- Tolerances from ±0.1% to ±20%
- TCR from ±25 ppm/°C to ±200 ppm/°C
- Power rating of 2W
- Voltage rating of 4kV
- Temperature range from -55°C to +150°C